Allied Telesis AT-S39 - Manual (Page 82)

Chapter 9: Port Trunking Commands
82
DESTROY SWITCH TRUNK
Syntax
destroy switch trunk=name
Parameter
trunk Specifies the name of the trunk to be deleted. (You
can enter any alphanumeric character for the name
and this command will still work. This is extremely
useful if you forgot the name you assigned the trunk.)
Description
This command deletes a port trunk from a switch. Once a port trunk has
been deleted, the ports that made up the trunk can be connected to
different end nodes.
Example
The following command deletes the trunk from the switch:
destroy switch trunk=a