beautypg.com

Set switch vlanstatus – Allied Telesis AT-S39 User Manual

Page 126

background image

Chapter 13: VLAN Commands

126

SET SWITCH VLANSTATUS

Syntax

set switch vlanstatus=enabled|disabled

Parameters

vlanstatus

Specifies the switch’s VLAN mode. Specifying

ENABLED means the switch will support tagged and
untagged VLANs. Specifying DISABLED means the
switch will support the Basic VLAN mode. The default
is tagged and untagged VLANs. Only one mode can be
active on a switch at a time.

Description

This command configures a switch to support either port-based and
tagged VLANs or the Basic VLAN mode.

Note

This command performs exactly the same function as the SET
SWITCH VLANMODE command.

Example

The following command configures the switch to support the Basic
VLAN mode:

set switch vlanstatus=disabled

See also other documents in the category Allied Telesis Computer hardware: