beautypg.com

Set switch vlanmode – Allied Telesis AT-S39 User Manual

Page 125

background image

AT-S39 Command Line Interface User’s Guide

125

SET SWITCH VLANMODE

Syntax

set switch vlanmode=tagged|basic

Parameters

vlanmode

Specifies the switch’s VLAN mode. Specifying TAGGED

means the switch will support tagged and untagged
VLANs. Specifying BASIC means the switch will
support the Basic VLAN mode. The default is tagged
and untagged VLANs. Only one mode can be active on
a switch at a time.

Description

This command configures a switch to support either port-based and
tagged VLANs or the Basic VLAN mode.

Note
This command performs exactly the same function as the SET
SWITCH VLANSTATUS command.

Example

The following command configures the switch to support the Basic
VLAN mode:

set switch vlanmode=basic

See also other documents in the category Allied Telesis Computer hardware: