Set switch consoletimer – Allied Telesis AT-S39 User Manual

Page 64

Text mode
Original mode

Chapter 6: Management Security Commands

SET SWITCH CONSOLETIMER

Syntax

set switch consoletimer=value

Parameter

consoletimer

Specifies the console timer in minutes. The range is 1

to 60 minutes. The default is 10 minutes.

Description

This command sets the console timer. The management software
automatically ends a management session if it does not detect any
activity from the local or remote management station after the specified
period of time set by the console timer. This security feature can prevent
unauthorized individuals from using your management station should
you step away from your system while configuring a switch.

Example

The following command sets the console timer to 25 minutes:

set switch consoletimer=25