Allied Telesis AT-S39 - Manual (Page 154)

Chapter 18: Statistics Commands
154
SHOW SWITCH PORT COUNTER
Syntax
show switch port=port counter
Parameters
port Specifies the port whose statistics you want to view.
You can view more than one port at a time. The ports
can be specified individually (e.g., 1,2,5,8), as a range
(e.g., 2-5), or both (e.g., 11-13,18). To view all ports, do
not specify a port.
Description
This command displays the operating statistics for a port on the switch.
Examples of the statistics include the number of packets transmitted
and received, and the number of CRC errors. For definitions of the
statistics, refer to the AT-S39 User’s Guide.
Examples
The following command displays the operating statistics for Port 4:
show switch port=4 counter
The following command displays the operating statistics for all ports:
show switch port counter