Allied Telesis AT-S39 - Manual (Page 178)

Chapter 20: Command Reference
178
Rapid Reconfiguration Spanning Tree Commands
SHOW RSTP
show rstp [portconfig=ports|portstate=port]
Displays the RSTP parameter settings.
ACTIVATE RSTP
activate rstp
Designates RSTP as the active spanning tree on the switch.
DISABLE RSTP
disable rstp
Deactivates RSTP on the switch.
ENABLE RSTP
enable rstp
Enables RSTP on the switch.
RESET RSTP
reset rstp
Returns all bridge and port RSTP parameters to the default settings.
SET RSTP
set rstp [default] [priority=priority]
[hellotime=hellotime] [forwarddelay=forwarddelay]
[maxage=maxage]
[forceversion=forcestpcompatible|normalrstp]
Activate and deactivates RSTP on the switch and sets the RSTP
parameter settings.
SET RSTP PORT
set rstp [port=port|all] [default]
[pathcost=pathcost] [portpriority=portpriority]
[edgeport=yes|no]
[pointtopoint=yes|no|autoupdate]
[migrationcheck=yes|no]
Sets a port’s RSTP parameter settings.