Allied Telesis AT-S39 - Manual (Page 53)

AT-S39 Command Line Interface User’s Guide
53
RESET SNMP
Syntax
reset snmp
Parameters
None.
Description
This command performs the following functions:
❑ Returns the SNMP community strings to the default values, which
are “public” for Read access and “private” for Write access.
❑ Disables SNMP access so that the switch cannot be managed
using an SNMP application.
❑ Deletes IP addresses of management workstations to receive
traps from the switch.
Example
The following command resets SNMP:
reset snmp