Allied Telesis AT-S39 - Manual (Page 33)

AT-S39 Command Line Interface User’s Guide
33
PURGE IP
Syntax
purge ip [ipaddress] [netmask] [route]
Parameters
ipaddress Returns the switch’s IP address to the default setting
0.0.0.0.
netmask Returns the subnet mask to the default setting
255.255.0.0.
route Returns the gateway address to the default setting
0.0.0.0.
Description
This command returns the switch’s IP address, subnet mask, and default
gateway address to the default settings. This command is similar in
function to the RESET IP command. Where they differ is that with this
command you can specify which parameter to reset, while you cannot
with the RESET IP command.
Example
The following command returns the IP address and subnet mask to the
default values:
purge ip ipaddress netmask