Allied Telesis AT-S39 - Manual (Page 172)

Chapter 20: Command Reference
172
SNMP Community Strings and Trap Commands
SHOW SNMP
show snmp
Displays the community strings for SNMP Read and Write access on the
switch.
DESTROY SNMP COMMUNITY
destroy snmp community=community
Deletes the Read or Write community string from the switch.
CREATE SNMP COMMUNITY
create snmp community=community access=read|write
Creates a new Read or Write community string on the switch.
SET SNMP COMMUNITY
set snmp community=community access=read|write
Activates a new Read or Write community string on the switch.
RESET SNMP
reset snmp
Returns the SNMP community strings to the default values, disables
SNMP access, and deletes the IP addresses of management workstations
that were receiving traps from the switch.
ADD SNMP COMMUNITY TRAPHOST
add snmp community=community traphost=ipaddress
Specifies the IP addresses of a management workstation you want to
receive management traps from the switch.
DELETE SNMP COMMUNITY TRAPHOST
delete snmp community=community
traphost=ipaddress
Deletes the IP address of a management workstation you no longer
want to receive traps from the switch.