Allied Telesis AT-S39 - Manual (Page 170)

Chapter 20: Command Reference
170
SET SYSTEM
set system [name=”name”] [contact=”contact”]
[location=”location”]
Sets a switch’s name, the name of the network administrator responsible
for managing the unit, and the location of the unit.
RESET SYSTEM
reset system [name] [contact] [location]
Deletes a switch’s name, the name of the network administrator
responsible for managing the unit, and the location of the unit.
SHOW DHCPBOOTP
show dhcpbootp
Displays the status of DHCP and BOOTP on the switch.
ENABLE DHCPBOOTP
enable dhcpbootp
Activates DHCP and BOOTP on the switch.
DISABLE DHCPBOOTP
disable dhcpbootp
Deactivates DHCP and BOOTP on the switch.
SHOW SWITCH
show switch
Displays a variety of switch information, including the MAC aging time,
console timer, broadcast timers, and VLAN mode.
RESTART SWITCH
restart switch
Resets the switch.
RESTART REBOOT
restart reboot
Returns the switch’s operating parameters to the default settings.