Allied Telesis AT-S39 - Manual (Page 70)

Chapter 7: Port Parameter Commands
70
Examples
The following command configures Port 11 to operate at 10 Mbps, half
duplex:
set switch port=11 speed=10mhalf
The following command sets the wiring configuration for Ports 12 to 16
to MDI-X:
set switch port=12-16 mdimode=mdix
The following command resets Ports 2:
set switch port=2 softreset=yes
The following command disables Ports 12 to 16:
set switch port=12-16 status=disabled