Allied Telesis AT-S39 - Manual (Page 110)

Chapter 12: Rapid Spanning Tree Protocol Commands
110
bridges connected to the port. If the port receives
STP BPDU packets in response, the port changes to
STP compatible mode. If the port receives RSTP
BPDU packets, it operates in RSTP.
Description
This command sets a port’s RSTP settings.
Examples
The following command sets Port 4’s path cost to 1 000 000 and it’s port
priority to 224:
set rstp port=4 pathcost=1000000 portpriority=14
The following command changes Ports 7 to 10 so they are not
considered as edge ports:
set rstp port=7-10 edgeport=no
The following command returns Port 11 to the default RSTP settings:
set rstp port=1 default