Allied Telesis AT-S39 - Manual (Page 51)

AT-S39 Command Line Interface User’s Guide
51
CREATE SNMP COMMUNITY
Syntax
create snmp community=community access=read|write
Parameter
community Specifies the new community string.
access Specifies which community string you are changing.
Options are Read and Write.
Description
This command creates a new Read or Write community string on the
switch. You cannot assign a new Read or Write community string until
after you have deleted the current community string using the DESTROY
SNMP command.
Once you have created the new community string, you must use the SET
SNMP COMMUNITY command to activate your change.
Example
The following command changes the Read community sting to “serv12”:
create snmp community=serv12 access=read