Allied Telesis AT-S39 - Manual (Page 49)

AT-S39 Command Line Interface User’s Guide
49
SHOW SNMP
Syntax
show snmp
Parameters
None.
Description
This command displays the community strings for SNMP Read and Write
access on the switch. The default community string for Read access is
Public and the default string for Write access is Private.
This command also displays the IP addresses of management
workstations that are to receive traps from the switch. To add IP address
of management stations, refer to the ADD SNMP COMMUNITY
TRAPHOST command in this chapter.
Example
The following command displays the community strings for SNMP.
show snmp