Allied Telesis AT-S39 - Manual (Page 17)

AT-S39 Command Line Interface User’s Guide
17
SAVE CONFIGURATION
Syntax
save configuration
Parameters
None.
Description
This command saves your changes to the switch’s flash memory for
permanent storage.
Whenever you make a change one of the operating parameters of the
switch, such as enter an IP address or create a new VLAN, the change is
stored in temporary memory. It will be lost the next time you reset the
switch or power cycle the unit.
To save your changes, you must use this command. The change is saved
to flash memory and is retained even when the switch is reset or
powered off.
Example
The following command saves your configuration:
save configuration