Allied Telesis AT-S39 - Manual (Page 71)

AT-S39 Command Line Interface User’s Guide
71
RESET SWITCH PORT
Syntax
reset switch port=port
Parameter
port Specifies the port to be reset. You can specify more
than one port at a time. You can specify the ports
individually (e.g., 2,3,5), as a range (e.g., 7-9), or both
(e.g., 2,5,7-9).
Description
This command resets a port. None of the operating parameters of a port
are changed by this command. The reset takes less that a second to
complete. You might reset a port if you believe the port has failed to
Auto-Negotiate correctly with its end node.
Example
The following command resets Port 5:
reset switch port=5