Allied Telesis AT-S39 - Manual (Page 169)

AT-S39 Command Line Interface User’s Guide
169
Basic Switch Commands
SHOW IP
show ip interface=1
Displays the IP address, subnet mask, and default gateway.
SET IP
set ip interface=1 ipaddress=IPaddress|DHCP
netmask=subnetmask
Configures the IP address and subnet mask, and activates and
deactivates DHCP and BOOTP.
SHOW IP ROUTE
show ip route
Displays the switch’s default gateway address.
SET IP ROUTE
set ip route ipaddress=ipaddress
Specifies the IP address of the default gateway for the switch.
RESET IP
reset ip interface=1
Returns a switch’s IP address, subnet mask, and gateway address to the
default values.
PURGE IP
purge ip [ipaddress] [netmask] [route]
Returns a switch’s IP address, subnet mask, or default gateway address
to its default value.
SHOW SYSTEM
show system
Displays a switch’s name, the name of the network administrator
responsible for managing the unit, and the location of the unit.