Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGER - Manual (Page 79)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
Edit Threshold Item dialog box
The MIB Variable field shows the selected variable name.
To set a threshold, enter a threshold value in the Value field, then click OK. Note that this specifies a
rising threshold which triggers an event when the variable's value increases to exceed the threshold,
i.e. crosses the threshold from below.
When the threshold is reached, a pop-up message is displayed or a predefined command is executed.
You can select which action is executed in the Option > Option > User Action tab.
Note - Thresholds can only be used for variables of type GAUGE, INTEGER, COUNTER,
GAUGE32, INTEGER32, COUNTER32, or COUNTER64.
6 MIB Variable Window
PN 613-50664-00 Rev A Page 79 of 127