2 reopen, 3 close, 4 property – Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGER User Manual
Page 41: 5 exit, 2 reopen 5.1.3 close 5.1.4 property 5.1.5 exit, View, Reopen, Close, Property, Exit
Allied Telesyn
AT-VIEW PLUS
DEVICE MANAGER
Note
- AT-View Plus Device Manager always checks the latest hardware
configuration of the target device when initiating connection. To check the
configuration on demand after the session is established, select View > Refresh.
Current status
Indicates whether or not AT-View Plus Device Manager is currently connected to a target
device and whether or not Trap operations are currently enabled.
5.1.2 Reopen
This command can be used to reconnect to a recently accessed device.
5.1.3 Close
Closes the SNMP session with the device and closes the Panel window. To connect to another
device, select File > Open.
5.1.4 Property
Change parameters for communicating with the device. The dialog box is identical to the Select
Target Host dialog box used to open a connection. For information on the settings that can be
modified or viewed from this dialog box, see section
5.1.5 Exit
Terminates connection to the target device and closes the AT-View Plus Device Manager
application.
5 Common Menus
PN 613-50664-00 Rev A
Page 41 of 127