Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGER - Manual (Page 36)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
Select Target Host dialog box
Target host
The host name or the IP address of the target host. To see the description of the host, fill in
host name or IP address and click Confirm. To connect to the host, click OK.
Note - If "v3" is the selected SNMP version and the specified user account has no READ
VIEW access to the System Description OID but has READ VIEW access to the System
Object ID, clicking on the confirm button will display the message, "Unable to retrieve
system description."
SNMP Options
Version
This drop down list allows you to select the SNMP version to use in managing the
target device.
Note - Before choosing "v2c" or "v3", make sure that the target device you are
connecting to supports SNMP v2c and/or SNMP v3 respectively.
PN 613-50664-00 Rev A Page 36 of 127