Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGER - Manual (Page 77)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
In the Edit tab, variables are shown in a table. The table has the following columns (fields) for each
entry.
6.4.1 Checkbox Column
The first (leftmost) column shows whether or not the variable can be changed (i.e. the variable
supports the SNMP Set operation). If a checkbox is displayed in the column, the variable's value can
be changed.
When you change several variables, set the new values in the Value column and then check all
corresponding boxes. AT-View Plus Device Manager sends new values for selected variables in a
batch.
6.4.2 MIB Variable Column
MIB variable names are displayed.
6.4.3 MIB Value Column
The value of the variable is displayed. If the variable has write access (and a checkbox is displayed
in the first column), this field is editable. To change the MIB value, change the value and check the
box and then click the Set MIB Value button. If the variable takes a value from a fixed set of
options, this field works as a pull down listbox. For such a variable, clicking this field shows the
listbox.
The value in this field is the one at the time when this tab is opened. The value in this column is not
updated automatically. If you want to see the latest value, use the Get MIB Value button or switch to
the Table tab.
Note - SNMPv3: Depending on the READ VIEW access settings of the User Account Name used,
there is a possibility that AT-View Plus Device Manager may not be able to access some MIB
values. When this happens, the table will display a blank cell for the those MIB values.
6.4.4 Select All Button
: checks all variables that can be changed.
6.4.5 Clear Button
: unchecks all variables that can be changed.
6.4.6 Reverse Button
PN 613-50664-00 Rev A Page 77 of 127
: Flips the states of all checkboxes, that is, unchecks all variables currently checked, and checks
all variables currently not checked.