Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGER - Manual (Page 13)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authNoPriv or
authPriv, you must specify an Authentication Protocol that is configured for the User Account Name
on the target host. The available Authentication Protocols are MD5 and SHA.
Examples:
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 3
-UserName ATVP -SecLevel authNoPriv
-AuthProtocol MD5 -AuthPassword PASS1234
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 3
-UserName ATVP1 -SecLevel authNoPriv
-AuthProtocol SHA -AuthPassword PASS1233
2.1.11 Authentication Password
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authNoPriv or
authPriv, you must specify an Authentication Password that is configured for the User Account
Name on the target host.
Examples:
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 3
-UserName ATVP -SecLevel authNoPriv
-AuthProtocol MD5 -AuthPassword PASS1234
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 3
-UserName ATVP1 -SecLevel authNoPriv
-AuthProtocol SHA -AuthPassword PASS1233
2.1.12 Privacy Protocol
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authPriv, you must
specify a Privacy Protocol that is configured for the User Account Name on the target host. The
available Privacy Protocol is DES.
Examples:
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 3
-UserName ATVP -SecLevel authPriv
-AuthProtocol MD5 -AuthPassword PASS1234
-PrivProtocol DES -PrivPassword PASS5678
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 3
PN 613-50664-00 Rev A Page 13 of 127