Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGER - Manual (Page 54)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
$VAROIDn
The OID of the n th MIB object sent with the trap, where n is a number in the range 1
to 9.
$VARNAMEn
The name of the n th MIB object sent with the trap, where n is a number in the range 1
to 9. If AT-View Plus Device Manager cannot get a name, $VAROIDn is used
instead.
$VALUEn
The value of the n th MIB object sent with the trap, where n is a number in the range 1
to 9.
5.3.4 Other Tab
In the Other tab, you can configure how MIB variables are displayed and the character encoding
system to use in sending and receiving SNMP data. Note that changes made here apply to windows
which are opened after the change is applied. Windows which are already open are not affected by
the changes.
Other tab
PN 613-50664-00 Rev A Page 54 of 127