Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGER - Manual (Page 23)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
• System Description
• Status Bar
3.2.1 System Name
Usually, the System Name is set to a unique descriptive name for identifying the device. This refers
to the MIB object sysName.
Note - SNMPv3: Depending on the READ VIEW access settings of the user name, there is a
possibility that the System Name will not be displayed.
3.2.2 System Location
Usually, the System Location is set to indicate where the device is installed. This refers to the MIB
object sysLocation.
Note - SNMPv3: Depending on the READ VIEW access settings of the user name, there is a
possibility that the System Location will not be displayed.
3.2.3 System Contact
The System Contact is set to indicate the name or phone number of the contact person for the device.
This refers to the MIB object sysContact.
Note - SNMPv3: Depending on the READ VIEW access settings of the user name, there is a
possibility that the System Contact will not be displayed.
3.2.4 System Description
Usually, the System Description is set to to indicate some information about the device such as
model name, software release and version. This refers to the MIB object sysDescr.
Note - SNMPv3: Depending on the READ VIEW access settings of the user name, there is a
possibility that the System Description will not be displayed.
3.2.5 Status Bar
The status bar is the area at the bottom of the panel window where a brief description of a
highlighted menu option or toolbar button is displayed. The depressed rectangular area at the right
end of the status bar shows the connection state of AT-View Plus Device Manager.
3 Main Window
PN 613-50664-00 Rev A Page 23 of 127