Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGER - Manual (Page 39)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
MD5
Use HMAC-MD5-96 protocol
SHA
Use HMAC-SHA-96 protocol
Authentication Password
If the Security Level is "Auth / No Priv" or "Auth / Priv", you need to specify an
Authentication Password. Make sure to set the Authentication Password to be the
same as what is configured on the target device.
Privacy Protocol
If the Security Level is "Auth / Priv", you need to specify a Privacy Protocol. This is
the available Privacy Protocol:
DES
Use Data Encryption Standard
Privacy Password
If the Security Level is "Auth / Priv", you need to specify a Privacy Password. Make
sure to set the Privacy Password to be the same as what is configured on the target
device.
Trap Options
Version
Select the SNMP version that will be used for the SNMP traps. You have the option
to use both versions 1 and 2.
Enable 'Trap' operation
To receive traps from a target host's SNMP agent, check this box.
Note - If SNMPc, HP OpenView or Tivoli NetView is running, AT-View Plus
Device Manager will not receive any traps. This is because the traps are being
intercepted by the network management application and will never reach AT-View
Plus Device Manager.
Polling options
Settings
This button opens the Polling Options dialog box, in which you can change the
polling interval and retry parameters.
PN 613-50664-00 Rev A Page 39 of 127