beautypg.com

2 starting from hp openview network node manager, Starting from hp openview network node manager – Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGER User Manual

Page 16

background image

Allied Telesyn

AT-VIEW PLUS

DEVICE MANAGER

Starting from SNMPc

Note

- SNMPv3: In order to start AT-View Plus Device Manager in SNMPv3 mode, the node's

Read/Write Access Mode attribute should be set to SNMP V3 No-Auth, SNMP V3 Auth-MD5, SNMP
V3 Auth-SHA, SNMP V3 Priv Auth-MD5, or SNMP V3 Priv Auth-SHA, depending on the SNMPv3
settings configured on the target device.

2.2.2 Starting From HP OpenView Network Node Manager

To start AT-View Plus Device Manager from HP OpenView, select a node on the map window, then
select AT-View Plus > Device Manager from the Tools menu.

PN 613-50664-00 Rev A

Page 16 of 127

See also other documents in the category Allied Telesis Computer hardware: