Allied Telesis AT-S63 - Manual (Page 81)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 81
The Port Configuration page is shown Figure 19.
Figure 19. Port Configuration Page
Note
The Port Configuration page in the figure above is from a 10/100/
1000 Mbps twisted pair port. The page for a fiber optic port will
contain a subset of the parameters.
If you are configuring multiple ports and the ports have different
settings, the Port Configuration page displays the settings of the lowest
numbered port. After you have configured the settings of the port, all of
its settings, including those that were not changed, are copied to the
other selected ports.
The Defaults button at the bottom of the page returns the port settings
to the default values, which can be found in Appendix A in the AT-S63
Management Software Menus Interface User’s Guide.
5. Configure the following parameters as necessary.