Allied Telesis AT-S63 - Manual (Page 107)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 107
Note
Some AT-9400 Series switches feature twisted pair ports that are
paired with SFP and GBIC slots. Allied Telesyn recommends not
including these ports in a port trunk. The operation of a port trunk
with one of these ports may be unpredictable if the port were to
transition to the redundant uplink status. For further information,
refer to “Redundant Twisted Pair Ports” on page 39.
8. Click Apply.
The new port trunk is now active on the switch.
9. To permanently save your changes, select the Save Config option in
the Configuration menu.
10. Configure the ports on the remote device for port trunking.
11. Connect the cables to the ports of the trunk on the switch and on the
remote device.
The port trunk is ready for network operations.