Allied Telesis AT-S63 - Manual (Page 132)

Chapter 10: File Downloads and Uploads
132 Section II: Advanced Operations
To download a file, perform the following procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the Utilities option.
The Utilities page is displayed with the System Utilities tab selected by
default, as shown in Figure 36.
Figure 36. System Utilities Tab (Configuration)
Note
The top portion of the System Utilities tab returns the switch to its
factory default settings. For instructions, refer to “Returning the
AT-S63 Management Software to the Factory Default Values” on
page 53.
3. In the TFTP Server IP Address field, enter the IP address of the
network node containing the TFTP server software.
4. For the TFTP Operation parameter, click Download.
5. In the TFTP Remote Filename field, enter the filename of the file on
the TFTP server to be downloaded to the switch. Be sure to include
the filename extension, such as “.img” for an AT-S63 image file or
“.cfg” for a configuration file.