Allied Telesis AT-S63 - Manual (Page 156)

Chapter 12: Classifiers
156 Section II: Advanced Operations
Some of the variables and settings display additional selections. For
example, selecting IP as the Protocol displays the selections shown in
Figure 46.
Figure 46. Create Classifier Page - IP Protocol
5. Configure the following parameters as desired:
ID
Specifies an ID number for the classifier. Every classifier on the switch
must have a unique ID number. The range is 1 to 9999. This
parameter is required.
Description
Specifies a description for the classifier. A description can be up to
fifteen alphanumeric characters. Spaces are allowed.
Destination MAC
Defines a traffic flow by its destination MAC address.
Source MAC
Defines a traffic flow by its source MAC address.