Allied Telesis AT-S63 - Manual (Page 318)

Chapter 20: Multiple Spanning Tree Protocol
318 Section IV: Spanning Tree Protocols
Managing MSTIs
This section contains the following procedures:
ˆ “Creating an MSTI” on page 318
ˆ “Modifying an MSTI” on page 319
ˆ “Deleting an MSTI” on page 320
Creating an
MSTI
To create an MSTI, perform the following procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the Layer 2 option.
3. Select the Spanning Tree tab.
The Spanning Tree tab is shown in Figure 113 on page 292.
4. Click Configure.
The expanded MSTP Spanning Tree tab is shown in Figure 125 on
page 315.
5. In the CIST/MSTI Table section of the tab, click Add.
The Add New MSTI page is shown in Figure 126.
Figure 126. Add New MSTI Page
6. In the MSTI ID field, enter an ID number for the MSTI. The range is 1
to 15.