Allied Telesis AT-S63 - Manual (Page 199)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 199
Active
Whether this policy is active on the switch. An active policy is assigned
to one or more switch ports. An inactive policy is not assigned to any
switch ports.
Traffic Class List
The traffic classes assigned to the policy.
Ingress Port List
The ingress ports to which the policy is assigned.
4. Click Create.
The Create Policy page opens, as shown in Figure 69.
Figure 69. Create Policy Page
5. Configure the following parameters as necessary:
ID
Specifies an ID number for the policy. Every policy on the switch must
be assigned a unique number. The range is 0 to 255. The default is 0.
This parameter is required.
Description
Specifies the policy description. A description can be up to 15
alphanumeric characters, including spaces.