Allied Telesis AT-S63 - Manual (Page 375)

AT-S63 Management Software Web Browser Interface User’s Guide
Section VI: Port Security 375
Configuring Authenticator Port Parameters
To configure authenticator port parameters, perform the following
procedure:
Note
The role of a port must be set to authenticator before the parameters
can be configured. For instructions, refer to “Setting Port Roles” on
page 372.
1. From the home page, select Configuration.
2. From the Configuration menu, select the Network Security option.
3. Select the 802.1x Port Access tab.
The 802.1x Port Access tab is shown in Figure 148 on page 372.
4. In the switch image, click the authenticator port to be configured. You
can configure more than one authenticator port at a time. The selected
port turns white.
5. Click Settings.