Allied Telesis AT-S63 User Manual
Page 157
AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations
157
Ethernet Format
Defines a traffic flow by the format of the Ethernet packets. Selections
are:
Untagged - Ethernet II untagged packets
Tagged - Ethernet II tagged packets
802.2 untagged - Ethernet 802.2 untagged packets
802.2 tagged - Ethernet 802.2 tagged packets
Priority
Defines a traffic flow by the user priority level in tagged Ethernet
frames. The range is 0 to 7.
VLAN ID
Defines a traffic flow of tagged packets by its VLAN ID number. The
range is 1 to 4094.
Protocol
Defines a traffic flow by the protocol specified in the Ethertype field of
the MAC header in an Ethernet II frame. Possible values are:
User Specified
IP
ARP
RARP
User Specified Protocol
Defines a traffic flow by the protocol number specified in the Ethertype
field of the MAC header in an Ethernet II frame. To use this parameter,
the Protocol parameter must be set to User Specified. The number can
be entered in either decimal or hexadecimal format. If the latter,
precede the number with “0x”. The range is 1536 (0x600) to 65535
(0xFFFF).
TOS/DSCP
Defines a traffic flow by its Type of Service or DSCP value. To set this
parameter, the Protocol parameter must be set to IP. Options are:
TOS (Type of Service)
DSCP
TOS
Defines a traffic flow by its Type of Service value. The range is 0 to 7.
To set this value, the TOS/DSCP parameter must be set to TOS.
DSCP
Defines a traffic flow by its DSCP value. The range is 0 to 63. To set
this value, the TOS/DSCP parameter must be set to DSCP.