Allied Telesis AT-S63 - Manual (Page 34)

Chapter 1: Starting a Web Browser Management Session
34 Section I: Basic Operations
3. Enter a user name and password. The AT-S63 management software
comes with two standard accounts, manager and operator. The former
allows you to change the switch’s parameter settings while the latter
only allows you to view the settings. For manager access, enter
“manager” as the user name. The default password is “friend.” For
operator access, enter “operator” as the user name. The default
password is “operator.” Login names and passwords are case-
sensitive.
For information about the two access levels, refer to Chapter 1,
“Overview,” in the AT-S63 Management Software Menus Interface
User’s Guide. For background information on creating management
accounts using a RADIUS or TACACS+ server, refer to Chapter 36,
“TACACS+ and RADIUS Protocols,” in the AT-S63 Management
Software Menus Interface User’s Guide.
You cannot change the default user names. To change a password,
refer to “Changing the Manager and Operator Passwords” on page 46.
The home page is shown in Figure 3.
Figure 3. Home page
The main menu is on the left side of the home page. It consists of the
following selections:
ˆ Enhanced Stacking
ˆ Configuration
ˆ Monitoring
ˆ Logout