Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 50)

AlliedView™-EMS 3.10 Device Management Guide Page 50 of 367
Event Log
Displays the RMON Event log.
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Note - The current firmware version does not allow Device Manager to display Utilization
information.
Interface Info
Standard
Displays port statistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port, and port status.
Note - The current firmware version does not allow the Promiscuous Mode
parameter to be configured.
Note - The current firmware version returns a "noSuchName" value for the
following parameters:
o
Received Error Packets
o
Transmitted Error Packets
o
Transmitted Buffer Length
o
Received Bytes (HC)
o
Received Unicast Packets (HC)
o
Received Multicast Packets (HC)
o
Received Broadcast Packets (HC)
o
Transmitted Bytes (HC)
o
Transmitted Unicast Packets (HC)
o
Transmitted Multicast Packets (HC)
o
Transmitted Broadcast Packets (HC)
Additional Info
Displays additional information about the port's interface info.
Error Statistics
Standard
Displays error statistics for the port.
Note - The Ethernet Chip Set parameter is not applicable to the AT-8000S series
and should be ignored.