Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 202)

AlliedView™-EMS 3.10 Device Management Guide Page 202 of 367
AT-8948i (AT-x900-48FE)
Device Manager LEDs for AT-8948 and AT-8948i (AT-x900-48FE)
LED State Description
PWR 1 and
PWR 2 Green
Gray
Red
There is a power supply unit (PSU) in the PSU bay, and it is
supplying power to the switch.
There is a functioning Fan Only Module (FOM) in the PSU bay.
Either:
- there is no PSU or FOM in the PSU bay, or
- a PSU is installed but has a power supply or fan fault or its
temperature has exceeded its recommended threshhold (75
degrees C), or
- an FOM is installed and a fan has failed.
DUPLEX Green
Orange
Gray
The port is operating at full duplex.
The port is operating at half duplex.
There is no link over the port.
Agent Menu
From the Agent menu, you can view and edit the system information for the switch, or log
into the CLI using Telnet.