Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 161)

AlliedView™-EMS 3.10 Device Management Guide Page 161 of 367
Board Info
Displays basic information on the boards that are currently installed.
Slot Info
Displays information on the Power Supply Bay slots.
Physical Interfaces
Displays information about the interfaces found in the device.
Firmware Info
Install Configurations
Displays information about the Software release currently loaded in the device.
Note - The current firmware version returns a 'noSuchName' value for the Release
File Exists? and Patch File Exists? parameters.
Install History
Displays information about the install history.
Configuration File
Displays the Configuration file name.
Note - The Startup Config and Save Running Config parameters accept inputs from 4
to 38 characters only.
Release Licenses
Displays a list of software releases installed on the switch.
Note - The current firmware version does not allow any of the parameters under
this table to be configured.
File System
Total Files
Displays the total number of files stored in the device.
File List
Displays a list of the files in the switch's file system.
Loader
Load Status
Displays the status of the device loader.
Load Parameters
Displays information about the files to be loaded.
LLDP Configuration
General Config
Displays basic LLDP configuration.