Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 251)

AlliedView™-EMS 3.10 Device Management Guide Page 251 of 367
Note - Valid MIB set values for the Register Probe Time parameter are in the range
[0-127] inclusive.
Note - Valid MIB set values for the Register Suppression Time parameter are in the
range [1-255] inclusive.
Interface Info
Displays the list of device's Protocol Independent Multicast interfaces.
DR Priority
Displays the DR Priority of the router's interface.
Neighbor Info
Displays a list of the device's PIM neighbors.
Note - The current firmware version returns ‘noSuchName’ for the Mode parameter.
Route Table
Displays the table of routes learned through PIM route exchange.
Note - The Route Table sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
Next Hop Table
Displays the table containing information on the next hops on outgoing interfaces
for routing IP multicast datagrams.
Note - The Next Hop Table sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter with a
value of 'noSuchName'.
Rendezvous Points
Displays the list of PIM information for candidate Rendezvous Points for IP multicast
groups.
Note - The Rendezvous Points sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter with a
value of 'noSuchName'.
Candidate - RP
Displays the list of IP multicast groups for which the local router is to advertise itself
as a Candidate-RP
Component
Displays the list of objects specific to a PIM.