Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 250)

AlliedView™-EMS 3.10 Device Management Guide Page 250 of 367
Note - The current firmware version does not return any value for the Interface
Index parameter.
Note - The following parameters are not applicable to the AT-9700 Series and
should be ignored:
o
Remote Address
o
Remote Subnet Mask
o
Generation ID
o
Received Packets
o
Transmitted Packets
o
Received Octets
o
Transmitted Octets
Note - The current firmware version returns 'noSuchName' for the Transmitted
Routes, Master Key and Master Key Version parameters.
Note - The current firmware version does not allow the Local Address parameter to
be configured.
Neighbor Info
Displays a list of the device's DVMRP neighbors, as discovered by receiving DVMRP
messages.
Note - The Neighbor Info sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
Route Table
Displays the table of routes learned through DVMRP route exchange.
Next Hop Table
Displays the table containing information on the next hops on outgoing interfaces
for routing IP multicast datagrams.
Note - The Next Hop Table sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter with a
value of 'noSuchName'.
PIM
Basic Info
Displays the default interval at which periodic PIM-SM Join/Prune messages are to be
sent, PIM Parameter Settings, Candidate - Rendezvous Point Global Settings, and
Candidate - BSR Settings.
Note - The current firmware version returns ‘noSuchName’ for the Join/Prune
Interval parameter and does not allow it to be configured.