Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 156)

AlliedView™-EMS 3.10 Device Management Guide Page 156 of 367
WEB browser
Opens your web browser and connects to the switch's HTTP server.
Note - The web browser can only contact the device if the device has a valid
resource file loaded and set, and the HTTP server and GUI on the device are
enabled.
Routing Menu
From the Routing menu, you can view and edit information about the router's IP routing
functions.
ARP Table
Displays the mapping of IP addresses to MAC addresses (the ARP cache) on the
router.
Address Table
Displays the list of IP interfaces and their IP addresses on the router.
Route Table
Displays the IP routing table on the router.
IP Statistics
Displays statistics about IP routing, including the number of IP datagrams received.
ICMP Statistics
Displays ICMP statistics.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and spanning tree status. The Bridge submenus are greyed out if bridges are not
configured.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Frame Relay Menu
From the Frame Relay menu you can view and edit Frame Relay information. The Frame
Relay submenus are greyed out if Frame Relay is not configured.