Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 237)

AlliedView™-EMS 3.10 Device Management Guide Page 237 of 367
MAC Address Security
Displays MAC Address Security parameters and allows you to set the security level
for dynamic and static MAC addresses learned and assigned to a port.
DoS Defense
Displays DoS Defense parameters and allows you to enable/disable a defense
mechanism on a port.
Note - The current firmware version returns 'noSuchName' for the Module ID and
Port Number parameters under each Attack Type option.
Note - The Attack Mirror Port parameter under each Attack Type option is already
obsolete and should be ignored.
Note - The Attack Mirror Port Status parameter is not applicable to the SYN Flood
and Smurf defenses and should be ignored.
LAN IP Subnet
Displays LAN IP address and subnet mask
SYN Flood Config
Displays syn flood attack type configuration
Smurf Config
Displays smurf attack type configuration.
Land Config
Displays land attack type configuration
IP Option Config
Displays IP option attack type configuration
Teardrop Config
Displays teardrop attack type configuration
Ping Death Config
Displays ping of death attack type configuration
Stacking Menu
From the Stacking menu, you can access slave switches and other Master switches in the
enhanced stack.
Stacking Info
Displays Enhanced Stacking parameters, allows you to set the switch's enhanced
stacking status and select a switch to manage in the enhanced stack.