Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 257)

AlliedView™-EMS 3.10 Device Management Guide Page 257 of 367
Note - The current firmware version does not allow the Primary IP Address and
Authentication Key parameters to be configured.
Note - The current firmware version does not allow the Priority parameter to be
configured when the Virtual IP Address (VRRP -> Associated IP Addresses) and the
Master IP Address (VRRP -> Operations) values are the same.
Associated IP Addresses
Displays the table of addresses associated with this virtual router.
Statistics
Diplays the total number of VRRP packets received with an invalid VRRP checksum
value, with an unknown or unsupported version number and with an invalid VRID
for this virtual router.
Security Menu
From the Security menu, you can view and edit different security and authentication
protocols SSL, SSH, AAC, ACL, port-based and MAC-based authentication.
Authentication Info
Displays authentication information such as the Port Access Control status,
authentication protocol used to authenticate user and authentication mode of the
device.
Port-based Authentication
PAE Port Info
Displays the system level information for each port supported by the Port Access
Entity.
Note - The current firmware version returns 'noSuchName' for the Port Number
parameter.
Note - The current firmware version does not allow the Initialize and Re-
authenticate parameters to be configured.
Authenticator PAE Info
Displays configuration objects for the Authenticator PAE associated with each port.
Note - The current firmware version returns 'noSuchName' for the Port Number
parameter.
Note - The current firmware version does not allow the Key Transmission Status
parameter to be configured.