Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT - Manual (Page 203)

AlliedView™-EMS 3.10 Device Management Guide Page 203 of 367
System Info
Displays basic system information, including system name, location, contact and
description.
Power Supply Info
Displays information about the power supply.
Firmware Info
Displays a list of software releases installed on the switch.
File List
Displays a list of the files in the switch's file system.
Config File Name
Displays the file name of the start-up configuration file.
Chassis Temperature and Fan Info
Displays the actual temperature of the switch, the temperature status, and the fan
status.
Telnet
Starts a Telnet connection to the switch.
WEB browser
Opens your web browser and connects to the switch's HTTP server.
Note - The web browser can only contact the device if the device has a valid
resource file loaded and set, and the HTTP server and GUI on the device are
enabled.
Reset Cold
Reset Cold resets the hardware and executes the default configuration file. Reset
Warm performs a warm start of the software modules and executes the default
configuration file.
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing
functions.
ARP Table
Displays the ARP cache on the switch.
Address Table
Displays the list of IP interfaces on the switch.