Allied Telesis AT-S63 - Manual (Page 87)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 87
SET USER PASSWORD
Syntax
set user manager|operator password= password
Parameter
password Specifies the password.
Description
This command sets the manager or operator’s password. The default
manager password is “friend.” The default operator password is “operator.”
The password can be from 0 to 16 alphanumeric characters. Allied Telesis
recommends that you avoid special characters, such as spaces, asterisks,
or exclamation points because some web browsers do not accept them in
passwords. The password is case sensitive.
Example
The following command sets the operator’s password to “newby”:
set user operator password=newby
Equivalent Commands
set password manager
For information, see “SET PASSWORD MANAGER” on page 79
set password operator
For information, see “SET PASSWORD OPERATOR” on page 80