Allied Telesis AT-S63 - Manual (Page 813)

AT-S63 Management Software Command Line User’s Guide
Section IX: Management Security 813
The following command selects RADIUS as the authentication protocol
with a global encryption key of leopard09 and a timeout of 15 seconds:
set authentication method=radius secret=leopard09 timeout=15
The following command removes the current global secret from the
RADIUS client without assigning a new value:
set authentication method=radius secret=none
AlliedWare Plus
Command
Syntax
radius-server timeout timeout
radius-server key secret
Mode
Configure mode
Description
You cannot specify the authentication method of RADIUS or TACACS+
from the AlliedWare Plus commands.
Example
This example sets the timeout to 55 seconds:
awplus> enable
awplus# configure terminal
awplus(config)# radius-server timeout 55
This example returns the timeout parameter to the default value of 30
seconds:
awplus> enable
awplus# configure terminal
awplus(config)# no radius-server timeout
This example sets the global encryption key to ‘key22a’:
awplus> enable
awplus# configure terminal
awplus(config)# radius-server key key22a
This example deletes the current global encryption key without defining a
new value:
awplus> enable
awplus# configure terminal
awplus(config)# no radius-server key