Allied Telesis AT-S63 - Manual (Page 163)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 163
SET SWITCH PORT FILTERING
Syntax
set switch port= port
[bcastfiltering=yes|no|on|off|true|false|enabled|
disabled]
[bcastegressfiltering=yes|no|on|off|true|false|enabled|
disabled]
[unkmcastfiltering=yes|no|on|off|true|false]
[unkmcastegressfiltering=yes|no|on|off|true|false]
[unkucastfiltering=yes|no|on|off|true|false]
[unkucastegressfiltering=yes|no|on|off|true|false]
Parameters
port Specifies the port you want to configure. You
can configure more than one port at a time.
bcastfiltering Controls the ingress broadcast frame filter. The
options are:
yes, on, true, enabled The port discards all
ingress broadcast
frames. These options
are equivalent.
no, off, false, disabled The port forwards all
ingress broadcast
frames. This is the
default. These options
are equivalent.
bcastegressfiltering Controls the egress broadcast frame filter. The
options are:
yes, on, true, enabled The port discards all
egress broadcast
frames. These options
are equivalent.
no, off, false, disabled The port forwards all
egress broadcast
frames. This is the
default. These options
are equivalent.
unkmcastfiltering Controls the unknown ingress multicast frame
filter. The options are:
yes, on, true, enabled The port discards all