Allied Telesis AT-S63 - Manual (Page 45)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 45
Moving Up the
Hierarchy
To move up the mode hierarchy, you use the EXIT command and the END
command.
EXIT Command
This command is available in all the modes. When you enter this
command at the User Exec mode or the Privileged Exec mode, you exit
from the AlliedWare Plus command interface and return to the standard
command line interface. The same command entered at any of the other
modes moves you up one level in the hierarchy, as illustrated in Figure 22.
Figure 22. Moving Up One Mode with the EXIT Command
Privileged
Executive
Mode
User
Executive
Mode
Configure
Terminal
Mode
Multiple
Tree Mode
Spanning
Class-Map
Mode
VLAN
Mode
Interface
Port
Mode
Interface
Line
Mode
Console
Policy Map
Mode
Class
Mode
VLAN
Database
Mode
exit
exit
Standard
Command
Line
exit
exit