Allied Telesis AT-S63 - Manual (Page 374)

Chapter 20: Quality of Service (QoS) Commands
374 Section II: Advanced Operations
DESTROY QOS POLICY
Syntax
destroy qos policy= value
Parameter
flowgroup Specifies the ID number of the policy you want to delete.
You can delete more than one policy at a time. You can
specify the flow groups individually, as a range, or both.
Description
This command deletes QoS policies.
Examples
This command deletes policy 41:
destroy qos policy=41
This command deletes policies 5 and 23:
destroy qos policy=5,23
AlliedWare Plus
Command
Syntax
no service-policy input id_number
Mode
Port Interface mode
Description
You delete policies with this AlliedWare Plus command by removing all of
their ingress ports.
Example
This example removes policy 12 by removing its ingress ports 1 to 4:
awplus> enable
awplus# con
figure terminal
awplus(conf)# interface 1-4
awplus(conf-if)# no service-policy input 12
Command
Available
AlliedWare Plus