Allied Telesis AT-S63 - Manual (Page 76)

Chapter 5: Static Port Trunks
76 Section I: Basic Operations
Figure 21. Modify Trunk Window
5. To add or remove ports from the trunk, use the Stack ID pull-down
menu in the switch image to select the ID number of one of the
switches in the stack and click the Apply button. You can add or
remove ports from a trunk from just one switch at a time.
6. In the switch image click the ports that you want to add or remove from
the trunk. A trunk member is white.
7. To change the name of the trunk, click the Trunk Name field and enter
a new name of up to 16 alphanumeric characters. Spaces and special
characters, such as asterisks and exclamation points, are not
permitted. Each trunk must have a unique name.
8. To change the load distribution method of the trunk, select the new
setting from the Trunk Method pull-down menu.
9. Click the Apply button. Your changes are immediately activated on
the trunk.
10. To add or remove more ports from the trunk from other switches in the
stack, repeat this procedure starting with step 4.
11. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.
12. Reconnect the cables to the ports of the trunk.